Centrifugal spray dryer

High-speed centrifugal spray dryer

Overview:

LPG series high-speed centrifugal spray drying is the most widely used process in liquid process formation and drying industry. It is most suitable for producing powdered and granular products from emulsion, suspension solution, and pumpable paste liquid raw materials. When the physical property indicators such as particle size distribution, moisture content, bulk density, and particle shape of the product are strictly required, spray drying is a very suitable process. Our factory's design and manufacturing capabilities for large centrifugal spray dryers have reached a diameter of 11 meters and a spray liquid volume of 10 tons per hour. Our factory will design different configurations according to the characteristics of different materials.

Working Principle:

The feed liquid is fed into the centrifugal atomizer installed at the top of the drying tower, where it is sprayed into extremely small droplets by the high-speed rotating atomizing disc. Simultaneously, hot air is distributed in a spiral manner and evenly spread throughout the drying tower via the hot air distributor mounted on its top. The two streams fully and concurrently contact each other, causing rapid evaporation of water. The material is dried into finished products in a very short period of time. The finished products are continuously discharged from the bottom of the drying tower through a cyclone separator (bag filter), while the exhaust gas is evacuated by a fan.

Features:

▲Quick drying speed, suitable for heat-sensitive materials;

▲The product is spherical particles with uniform particle size, good fluidity, good solubility, high purity, and good quality;

▲The product is formed in one step without crushing and screening, and the process control is automated, making the production process simple and easy to operate;

The particle size, bulk density, and moisture content of the product can be adjusted within a certain range;

▲With a wide range of applications, it can be used for both hot-air drying and cold-air granulation according to the characteristics of the material, demonstrating strong adaptability to different materials.

Adaptation materials

Food industry: whole milk powder, whey protein, cocoa powder, milk substitute powder, egg white (yolk), etc.

Food and plants: oats, chicken broth, coffee, instant tea, seasoning spices, meat, protein, etc.

Carbohydrates: corn syrup, corn starch, glucose, pectin, maltose, potassium sorbate, etc.

Pharmaceutical products: Chinese herbal extract, medicinal gel, yeast, vitamins, antibiotics, amylase, etc.

Plastic resins: AB, ABS lotion, phenolic resin, formaldehyde resin, polyvinyl chloride, etc.

Chemical industry: basic dyes, dye intermediates, catalysts, amino acids, white carbon black, etc

Ceramics: alumina, tile materials, magnesium oxide, talc, etc